货架厂家

联系我们

山东蕴达金属制品有限公司

电话:18963095832

邮箱:正规德州扑克平台425893602@qq.com

地址:济南市商河县孙集镇工业园

重型货架必须必须的管理方法

浏览量:   来源:tdgjwp.com  作者:山东蕴达

大连货架:托盘货架要以拖盘为质粒载体承重货品为目地的专业能力仓储货架方式.每一拖盘为1个储位,因此又被称作金属托盘仓储货架.横梁货架关键由立杆片、承重梁构成.构造简易,可以信赖.


Dalian Shelf: The pallet shelf should be a kind of specialized storage shelf with pallets as the carriers of plasmids. Each pallet is a storage space, so it is also called metal pallet storage shelf. The key of the cross-beam shelf is composed of poles and load-bearing beams. The structure is simple and can be trusted.


托盘货架的构造。横梁货架由立杆片、承重梁、安全性销、隔挡、安全防护对策、联接杆、走廊梁等构成。


The structure of pallet rack. The cross beam rack is composed of vertical bar, load-bearing beam, safety pin, barrier, safety protection countermeasure, connecting rod, corridor beam, etc.


大连货架生产的横梁式货架的结构


The Structure of Cross Beam Shelf Produced by Dalian Shelf


立杆片:由二根立杆、横撑、斜撑构成,由高强螺栓卡紧组成.立杆常见规格型号有:60*80mm,67*90mm,70*90mm,70*100mm,95*120mm.立杆反面冲单双排棱形孔,侧面为圆孔,上下间距均为75mm.正面菱形孔便于横梁柱爪挂接安装.侧面圆孔便于横斜撑安装.


Vertical rod sheet: It consists of two vertical rods, cross braces and diagonal braces, and consists of high-strength bolts. The common specifications of vertical rods are: 60*80mm, 67*90mm, 70*90mm, 70*100mm and 95*120mm. Vertical rod punches single and double row prismatic holes on the opposite side, with round holes on the side and 75 mm between upper and lower sides. Frontal diamond holes are convenient for hanging and installing of column claws of cross beam. Side round holes are convenient for installation of diagonal braces.


常用立柱规格


Common column specifications


承重梁:由一条承重梁和二只柱爪电焊焊接制做进行.承重梁与立杆安裝时,必须柱爪挂插在立杆反面的棱形孔壁,柱爪上的圆洞则是用以安裝安全性销.承重梁有矩管梁和抱焊梁二种.矩管无须再多,抱焊梁截面形状见下图--常用抱焊梁规格表.


Load-bearing beams are welded by welding one load-bearing beam and two claws。 When installing load-bearing beams and poles, the claws must be inserted into the prismatic hole wall on the opposite side of the pole, while the holes on the claws are used to install safety pins。 There are two kinds of load-bearing beams: rectangular pipe beams and embracing welded beams。 There is no need for more rectangular pipes。 The cross-section shape of embracing welded beams is shown in the following figure-specification table of commonly used embracing welded beams。


防护措施分为地面防护和高空防护。


The protective measures are divided into ground protection and altitude protection。


正规德州扑克平台路面安全防护:横梁货架通常都用电动叉车存储货品,电动叉车在平时走动或工作全过程中,免不了撞击仓储货架,这时安全防范对策就十分必需.


正规德州扑克平台Road safety protection: The crossbeam shelves are usually stored with electric forklift trucks. Electric forklift trucks are unavoidable to impact the storage shelves during the normal walking or the whole working process. At this time, safety countermeasures are very necessary.


地面防护包括:护脚,和防撞护栏.护脚保护立柱底部.防撞护栏则是安装在货架端部,主要用于叉车在主通道行驶时碰撞货架.大连横梁式货架的组成结构


Ground protection includes foot guard and crash barrier. Foot guard protects the bottom of the column. Crash guard is installed at the end of the rack, mainly used for forklift truck crashing the rack in the main passage. The structure of Dalian crossbeam rack is http://tdgjwp.com.